Forum
Welcome, Guest
Username: Password: Remember me
This is the optional category header for the Suggestion Box.
  • Page:
  • 1

TOPIC:

drbd service cant start after simulate power loss. 7 years 2 weeks ago #1246

  • Dmitry
  • Dmitry's Avatar Topic Author
Hello all HA-Lizard guru. I have a freshly installed HA-Lizard on Xenserver 7.1 in the test environment. All of the test procedures (reboot both nodes on the pool, switching off network adapers) are ok, but power loss simulation was failed.
iscsi-cfg status on node 1
Warning: Spoiler! [ Click to expand ]

iscsi-cfg status on node 2
Warning: Spoiler! [ Click to expand ]


iscsi-cfg log commands:
Warning: Spoiler! [ Click to expand ]

When I start drbd service manually on both nodes and then restart tgtd service on master iscsi node, all appears good. What I should do and what I missed?
ps. Sorry for a posting to wrong forum category, I'm novice on this site.
Attachments:

Please Log in or Create an account to join the conversation.

Last edit: by Dmitry.

drbd service cant start after simulate power loss. 7 years 2 weeks ago #1249

  • Salvatore Costantino
  • Salvatore Costantino's Avatar
  • Offline
  • Posts: 722
We are not officially supporting 7.1 yet. We can look into this once we have a 7.1 environment in place.

In the meantime, can you check with the user on this post to see if 7.1 testing produced similar results.

Please Log in or Create an account to join the conversation.

drbd service cant start after simulate power loss. 7 years 2 weeks ago #1252

  • Dmitry
  • Dmitry's Avatar Topic Author
Thank you for a fast reply! So the only possible way to solve problem is waiting. OK.
I will try (on Monday) to add to /etc/rc.d/rc.local something like this: sleep 120;systemctl restart drbd.service;systemctl restart tgtd.service, and look what will happen.

Please Log in or Create an account to join the conversation.

Last edit: by Dmitry.
  • Page:
  • 1