TOPIC:

please post the commands that need to be implemented step by step on each host. for the drbd initializtion

keep getting iscsi2 is not defined in my config file on my slave server. its defined....

The steps for initializing a DRBD device are documented in our reference design document here:
halizard.com/images/pdf/iscsi-ha%202-nod...0howto_1.5_final.pdf

If you continue to have trouble try posting your configuration files.
Also, make sure the backing device you are assiging to iscsi2 is not already in use on your system.

I assume that this procedures cannot be used with ha-lizard-nosan-installer?
Or can we use it and then make the changes to add the additional drives?
Thanks

You can build the cluster using the installer and then make the necessary changes later to add the additional storage.

See this link for a complete set of sample files that require changes:
halizard.com/forum/software-support/94-2...server-cluster-issue

Robert I tried but was never able to get it to work after running the auto-installer. Good luck my friend please let me know what you did if you do get it to work. I eventually abandoned setting up my pool with the two SR's